See the unseen defects
Inspection and metrology for front-end fabs and advanced packaging, from incoming substrate to final shipment
Machine components include Fan filter unit FFU, Panels Enclosure, Inspection module PM, Load port, Wafer handling EFEM, Operator terminal HMI
CORE CAPABILITIES
The invisiblemade measurable
BF / DF · PL
Selectable imaging channels
Multi-channel optics
Bright-field, dark-field, PL and multi-band imaging, matched to each material and defect type
Sub-micron
Minimum TSV / TGV CD
3D precision metrology
Thickness and TTV, Bow / Warp, film thickness and trench depth, all measured without contact
2 nm
Vertical precision
Full-surface topography
One pass over front and back detects dislocations, cracks, epi steps and bonding voids
MES / YMS
Direct data integration
Automatic defect classification
PlanckADC classifies and grades defects automatically, with SPC and Wafer Map traceability
01MODULAR PLATFORM
Modular Design


01One EFEM
One EFEMmany chambers
One EFEM docks several inspection and metrology chambers. An EFEM with more load ports takes more chambers, configured to what the line needs.
02One load
One loadall done
The wafer leaves its cassette once. Inspection and metrology finish in the same tool.
03Any mix
Any functionany mix
04One system
One systemlower cost
Shared automation, unified software and common spares save cleanroom space and labor. Operators learn it once.
9 SERIES · ANY MIX
Any inspection or metrology function from nine series
026 steps × 9 platforms
Process steps × platform coverage
- Main application
- Optional or by configuration
| Process step | Inspection7 | Metrology2 | Platforms | |||||||
|---|---|---|---|---|---|---|---|---|---|---|
| KIBOUnpatterned | ACONCAPatterned | CANIGOBackside | MUSHIWafer edge | CARPPAProcess control | VEYMONTNano-topography | DRAKENSSiC defects | NANSIMulti-channel | ELBRUSWafer geometry | ||
| Incoming Substrate and Wafer QC | 7 | |||||||||
| Epitaxy | 4 | |||||||||
| Lithography·Etch·Thin Film | 6 | |||||||||
| CMP·Thinning | 7 | |||||||||
| Advanced Packaging RDL Bump TSV·Bonding·Glass Substrate | 6 | |||||||||
| Outgoing QC·Tool and Process Cleanliness Monitoring | 7 | |||||||||
| Reach | 5 / 6 | 3 / 6 | 5 / 6 | 4 / 6 | 3 / 6 | 4 / 6 | 3 / 6 | 5 / 6 | 5 / 6 | |
| Platform | Incoming Substrate and Wafer QC | Epitaxy | Lithography·Etch·Thin Film | CMP·Thinning | Advanced Packaging RDL Bump TSV·Bonding·Glass Substrate | Outgoing QC·Tool and Process Cleanliness Monitoring | Reach |
|---|---|---|---|---|---|---|---|
| Inspection7 | |||||||
| KIBOUnpatterned | 5 / 6 | ||||||
| ACONCAPatterned | 3 / 6 | ||||||
| CANIGOBackside | 5 / 6 | ||||||
| MUSHIWafer edge | 4 / 6 | ||||||
| CARPPAProcess control | 3 / 6 | ||||||
| VEYMONTNano-topography | 4 / 6 | ||||||
| DRAKENSSiC defects | 3 / 6 | ||||||
| Metrology2 | |||||||
| NANSIMulti-channel | 5 / 6 | ||||||
| ELBRUSWafer geometry | 5 / 6 | ||||||
| Platforms | 7 | 4 | 6 | 7 | 6 | 7 | |
START A CONVERSATION
Discuss yourprocess needs
- SalesProducts and commercial inquiriessales@plancksemicon.com
- GeneralCorporate affairs and partnershipsinfo@plancksemicon.com
- Phone
- +86-755-21063549




















